This picture is a representation only.

*Not available to California or Texas.

 

 

The SK Series is ideal for: Contract cleaners, facility maintenance and wrecking yards.

Note: Requires group U1 235 CCA battery, not included.

 

This industrial rated 14 HP Vanguard twin-cylinder electric-start engine provides power to the pump and 12 VDC burner. The stainless steel wrapped 1/2" SCH 80 coil heats the water up to 225° F. You will experience extended run times with the large 8.0 gallon gas and diesel tanks. An industrial rated belt-drive pump turns at lower RPM resulting in a cooler running and longer lasting pump compared to one that is direct drive.

 

The trailer is ready for your SK Hot Mobile Wash Skid machine. It's 12-guage power coated frame includes a 185 gallon seamless polyethylene tank with garden hose fitting and 3/4" 80 micron filter. The 3700 lb torsion axle provides a smooth ride and up to 300% more wheel travel than a conventional spring axles. A swing-up jack and large swivel caster wheel makes moving it easy when not coupled to a tow vehicle. The recessed rubber mounted tail lights are tucked away from damage.

Pressure Washer Standard Features:

• 14 HP Vanguard twin-cylinder electric-start engine with low oil shutdown
• Stainless Steel wrapped 1/2 inch SCH 80 coil which heats water up to 225°
• 8.0 gallon gas and diesel tanks
• Belt Drive
• 48" Spray wand / trigger gun
• 50' high pressure hose
• Quick connect nozzles
• High limit switch
• Pressure relief valve
• Burst disc and flow sinsitive unloader
• Adjustable thermostat up to 250°
• Reliable 12 volt burner system
• Requires group U1 235 CCA battery - NOT INCLUDED

Trailer Standard Features:

•12-gauge pwer coatd frame
• Pump - AR North America
• 185 gallon seamless polyethylene tank
• Garden hose fitting and 3/4" 80 micron filter
• Garden hose 100' x 5/8"
• Stainless steel low pressure garden hose reel - pivoting 100' x 5/8" capacity
• Stainless steel high pressure hose reel pivoting 100' x 3/8" capacity
• Class 11, 3500 lb rated 2" ball hitch
• 3700 lb torsion axle
• Swing-up jack and large swivel caster wheel
• Recessed rubber mounted tail lights

Warranty:

• One year limited parts warranty- Provided by Hydro Tek, excluding normal wear items listed below. Labor excluded.
• One year warranty on engines & one year or less on electric motors- Up to two year limited warranty provided by the respective engine manufacturer and up to one year by electric motor manufacturer. Labor excluded.
• One year coil warranty- one year parts warranty. Labor, freezing & descaling excluded.
• One year pump warranty- Up to one year limited warranty on crankcase of the pump provided by the respective pump manufacturer. Labor excluded.