*This picture is a representation.

The ¼ inch male pipe thread nozzles, rated up to 4000 PSI. Hardened stainless steel nozzle insert insures consistent, accurate orifice size.

 

FEATURES:

 

• Orfice recessed for protection
• 4000 PSI rated working pressure
• ± 2% Flow tolerance @ 70° F
• Hard edge pattern, light center requires overlap to cover center.

 

 

0° – Cutting nozzle. It delivers a concentrated stream that can gouge or cut. It can cut stubborn stains from concrete and other hard surfaces.

15° – Chiseling nozzle. Working at a 45° angle, this nozzle works like a scraper, stripping paint, grease and grime from hard surfaces.

25° – Flushing nozzle. The most commonly used nozzle for cleaning dirt from siding, sidewalks and metal furniture as well as for wet sweeping leaves.

40° – Wash nozzle. Its wide spray allows you to wash and rinse a large area fast. It is usually safe with most surfaces, including aluminum siding, windows and vehicles.

It is very important to have your nozzles sized properly to your pressure washer.

Spray Nozzle Selection Chart
	1500 PSI	2000 PSI	2500 PSI	3000 PSI	3500 PSI	4000 PSI	4500 PSI	5000 PSI
GPM	NOZZLE SIZE
2.0	3.5	3.0	2.5	2.5	2.0	2.0	2.0	2.0
2.5	4.0	3.5	3.0	3.0	2.5	2.5	2.0	2.0
3.0	5.0	4.0	4.0	3.5	3.0	3.0	3.0	2.5
3.5	5.5	5.0	4.5	4.0	3.5	3.5	3.0	3.0
4.0	6.5	5.5	5.0	4.5	4.5	4.0	4.0	3.5
4.5	7.5	6.5	5.5	5.0	5.0	4.5	4.0	4.0
5.0	8.0	7.0	6.5	6.0	5.5	5.0	4.5	4.5
5.5	9.0	8.0	7.0	6.5	6.0	5.5	5.0	5.0
6.0	10.0	8.5	7.5	7.0	6.5	6.0	5.5	5.5
6.5	11.0	9.0	8.0	7.5	7.0	6.5	6.0	6.0
7.0	12.0	10.0	9.0	8.0	7.5	7.0	6.5	6.5
7.5	12.0	11.0	10.0	8.5	8.0	7.5	7.0	6.5
8.0	13.0	12.0	10.0	9.0	8.5	8.0	7.5	7.0
8.5	15.0	12.0	11.0	10.0	9.0	8.5	8.0	7.5
9.0	15.0	13.0	12.0	11.0	10.0	9.0	8.5	8.0